AIrtac X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Black
AIrtac X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Black
SKU: AIrtac
Availability: Out of stock
More Information
| Manufacturer | AirTac |
|---|---|
| Internal Part Type | HPA Mag Adapter |
| External Part Type | Magazine Accessory |
| Mechanism | HPA/High Pressure Air |
| SKU | AIrtac |
Details
Airtac replicated a MK23 magazine, and adapted it to take HPA, fed by 30 round shotgun shells.
Massively improved ergonomics and magazine catch feel (compared to our previous generation of MK23 shotgun shell adapters).
CNC Aluminium magazine baseplate
BB latch to prevent dropped BBs on reload (0 BBs are dropped when an empty shell is ejected).
High internal volume for good FPS/PSI.
Works best with CYMA Shotgun shells, available on the website.
US Style Fitting as standard
Compatible with all clone MK23 and Novritsch SSX23/303
TM Feed lips may be required when using with a TM MK23
This adapter is fully built and does not require donor parts
The adapter comes with a 15cm airline, which can be cut down to your preferred size, and a blackened Foster 22 (US Style) connector fitted.
You will also be provided three feed tubes of different lengths. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results.
You will likely find that sites that do not usually allow HPA adapters in pistols, will have no problem with these adapters, due to their low capacity, and covert profile.
DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE
Frequently Bought Together
