Gate PULSAR S HPA Engine with ASTER II Bluetooth - Rear Wired

Caution! The purple nozzle of the HPA PULSAR S engine does not require the use of a stabilising sleeve in the hop-up chamber. The use of a stabilising sleeve with the purple nozzle may negatively affect engine performance. The golden nozzle of the HPA PULSAR S engine may require additional stabilization. In this case, it is recommended to use a stabilising sleeve in the hop-up chamber.

• PULSAR Single Solenoid
• Solenoid Voltage Range: 5-8.4 V
• Operating Pressure: 60-140 PSI – high pressure only
• Gas Consumption: For 90 PSI and a 48 ci/0.8 l 300 bar/4500 PSI bottle – 1 PSI per shot
• Dimensions (Length x Diameter): 88 mm x 25.4 mm
• Finished Product Weight: 75 g
• Operating Temperature Range: min. -15° C, max. +50° C
• Relative Humidity: ≤ 80%
• Adjustable ROF: 1 to 100 RpS
• Velocity: 200 – 550 FPS

• Operation mode: Open Bolt
• Pressure range: 60 to 140 PSI
Due to the nature of the design and operation of the engine, the compatibility range of the nozzle length is between 21.25 mm and 21.40 mm relative to that of the AEG nozzle>/strong>
• ASTER II Bluetooth®
• Supply Voltage Range [AEG application]: 3.75 - 12.9 V
• Supply Voltage Range [HPA application]: 5 - 8.6 V
• Current Consumption: 20 mA
• Low Power Mode:130 µA
• Dimensions (Length x Width x Height): 43.8 mm x 28.7 mm x 5.5 mm
• Finished Product Weight: 23.4 g
• Operating Temperature Range: min. -15°C max. + 50°C
• Relative Humidity: ≤ 80%