Novritsch has done it again with the superb SSG10 A3 variant of his tried and tested SSG10 platform; boasting the same impressive internals and high performance as the original but coupled with the MLC-S2 Chassis from Maple Leaf. The Maple Leaf chassis makes the SSG10 a whole new beast when it comes to handling and accessorisation, furnishing the rifle with all the most modern attachment interfaces from front to back so you can kit her out to win.

Features
• 105.5cm Full Length
• 28rd magazine
• Bolt action
• 6.01mm 430mm inner barrel
• Slider style hop unit
• Maple Leaf MLC-S2 Chassis w/Novritsch butt plate

The SSG10 A3 is supplied as a kit and will require assembly before it is ready to use. The parts supplied in the kit are as follows: SSG10 Action, PTS Syndicate EPG GBBR Grip, Maple Leaf MLC-S2 Chassis w/Novritsch butt plate. All tools to complete assembly are provided in the kit.

The original magazine release assembly will first need to be removed from the SSG10 action and the magazine release assembly supplied with the MLC-S2 chassis must be mounted to the SSG10 action using the screws which mount the original magazine release assembly.

With this done, you can attach the PTS Syndicate EPG to the chassis using the Allen bolt provided.

With the chassis and action both assembled, the two can be bedded together by lowering the action into the chassis and securing the 3 screws through the bottom of the chassis. The first screw is located at the front of the chassis, inset into the bipod rail, the second screw is in the center of the chassis and the final screw is just in front of the pistol grip, on the trigger guard.

When installing the action of the SSG10 platform into the stock, it is important that the receiver is seated properly and that all screws are tightened down. Failure to do so can cause damage to the magazine catch and feeding mechanism. If you're struggling with installation, we recommend contacting us so we can talk you through it.

these screws mustn't be over-tightened as this can cause damage to the internal parts, simply tightening them to hand tight is sufficient to keep the chassis attached securely to the action.

You MUST be 18 or over to purchase this.

Please note this is a VCRA applicable Realistic Imitation Firearm. You must be UKARA registered (or have a defence under the VCRA) to purchase this as is, for more information please click here. Please contact us or state your UKARA registration number in the comments box when you order.

If needed we can spray this for you (at an extra cost of £10.00) so that it meets the requirements to allow anyone over 18 to purchase this. Please select this option from the menu above.