When setting eyes upon the VORSK VM9, one will immediately notice the raised rail section to the back of the slide that both houses the rear green fibre sights as well as providing a stable platform for all your aftermarket sights/ optics. This rail features a cut-out through the centre, used to align the rear and raised forward fibre sight. What was the standard 180° ejection port opening now features six cut-out “fins” that line up nicely with the rear slide grip markings and with the mounted rail, gives a very aggressive looking slide package. As with most VORSK replicas, the 6.03mm inner barrel is threaded to accept VORSKs barrel extending suppressor kits (the outer barrel is also threaded for your suppressors/ tracers).
When primed for fire in the triggers “single-action” position, the fire control can be moved through to the “safe” position which ‘decocks’ the hammer and also disengages the trigger ensuring the VM9 is completely “safe” when in those no-fire zones. Disengaging the safety allows the trigger to move again, and so long as there is a remaining round in the chamber, one can then fire the VM9 through the “long-pull” of the double-action trigger that first pulls back the hammer before release unto the firing pin. Other furniture within reach include the slide-release, magazine release and of course the hammer itself. The VM9 platform features a very intuitive, simple to use slide release that will encourage you to get inside and tweak that hop-unit, as well as deliver all the standard lubricating care a full-metal GBB sidearm requires. The moulded, stippled pistol grip is the only large section of polymer found on this replica and wraps around a double-stacked magazine ensuring a firm and chunky grip.
The magazine itself features a ‘mid-range’ extension providing up to 30 rounds and a larger gas reservoir than the typical VM9 magazine that was supplied with the VM9 OSIRIS from VORSK. Due to it being the same platform, standard VM9 and extended 50R magazines are also available from VORSK.
You MUST be 18 or over to purchase this.
Please note this is a VCRA applicable Realistic Imitation Firearm. You must be UKARA registered (or have a defence under the VCRA) to purchase this as is, for more information please click here. Please contact us or state your UKARA registration number in the comments box when you order.
If needed we can spray this for you (at an extra cost of £10.00) so that it meets the requirements to allow anyone over 18 to purchase this. Please select this option from the menu above.
